Music Gear Forums » geekslutz forum

Grease for EQ sliders?

admin — Tue, 11 May 2010 03:20:23 +0000

I just bought a Urei 530 off of eBay and the sliders are hardly moveable, if I use a ton of force I can get them all the way up, or all the way down, but I can’t move them smoothly. I tried some contact cleaner, but that didn’t help

By Sean Sullivan (Gearslutz.com)

Roland JP-8 D-beam Mod

admin — Mon, 10 May 2010 21:29:12 +0000

Has anyone ever tried to hack a D-Beam circuit onto older roland instruments? (the filter or pitch)

By sammytaters (Gearslutz.com)

Phantom Power problems

admin — Mon, 10 May 2010 10:25:39 +0000

I wonder if anyone can help me with a phantom power related problem I’m having. I’ve recently bought an old 80s analogue desk (a MTR 12 to 8..very basic) and am simply running the desk’s outs into my Focusrite Saffire Pros line inputs. So technically just utilising the desks channel strips (which sound surprisingly good for a small desk!..nice and warm).

By stidders (Gearslutz.com)

Phantom Power problems

admin — Mon, 10 May 2010 10:25:39 +0000

By stidders (Gearslutz.com)

Intermittent signal on R channel – Studiomaster 16-2 Gold

admin — Mon, 10 May 2010 10:18:53 +0000

I finished recapping my Studiomaster Session Mix 16:2 Gold. No more background noise but still have a problem with the right main channel : sometimes it stops working.

By aql (Gearslutz.com)

In search for a good repair shop in The Hague – Netherlands

admin — Sun, 09 May 2010 08:08:28 +0000

Hello All, I’m currently looking for a good electronics repair shop in or around The Hague, Netherlands, in order to get my old R2R 4Track fixed, plus a couple of other old and defect pieces of gear. Can anyone recommend a place around here i might go to ? Thanks

By spasm_dtc (Gearslutz.com)

Simple DIY project for beginner?

admin — Sat, 08 May 2010 14:27:30 +0000

I have a nice long summer break from University coming up and I could do with a challenge. I’m looking into building my own outboard and I’m not particularly picky. As long as it’s relatively simple to produce, I don’t mind if it’s a compressor, EQ or mic pre.

By eddcunningham (Gearslutz.com)

Soundcraft 200 Delta Problem: LED meter not working

admin — Sat, 08 May 2010 11:19:37 +0000

The meter on one group module is dead.

By okailla (Gearslutz.com)

Anyone racking gear in NC?

admin — Fri, 07 May 2010 20:07:21 +0000

Hey, just wondering if there are any techs out here in NC that would be interested in racking up some things for me, shoot me a PM and lets talk!!

By TheNewUnknown (Gearslutz.com)

Anyone racking gear in NC?

admin — Fri, 07 May 2010 20:07:21 +0000

Hey, just wondering if there are any techs out here in NC that would be interested in racking up some things for me, shoot me a PM and lets talk!!

By TheNewUnknown (Gearslutz.com)